- The HAC concept is achieved by enclosing both ends of the Hot aisle and are closed using Swing / Sliding Doors or Blinds for cold air containment and the Hot air returns to PAC through remaining area as shown in the Concept Drawing.
- The CAC concept is achieved by enclosing both ends of the cold aisle and are closed using Swing / Sliding Doors or Blinds for cold air containment. In addition all cabinets are fitted with Plinth, Rack Side Thermal Sealing and Blanking Panels between the equipment, in this way the only route for the Cold air is through the equipment.
- NRSe Series - Ultra rigid Enhanced Racks for high density application in data centers & server room. The Racks manufactured out of steel sheet punched, formed, welded and Powder coated with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001Manufacturing & Quality management system to ensure highest quality product.
- HDCF Series - Ultra Rigid Enhanced High Density Cable Frame designed to manage High Volume Vertical & Horizontal Cables in data center, generally same can’t be managed with 600 Wide Racks. To ease the design of Data center NetRack comes through a break through Innovation which can be Installed in between or end of racks.
- Trend towards having Intelligent Infra Capsules on Premises at Banking & Insurance Sector, Warehouses, Manufacturing sector & Educational Institutions made the Rack manufactures to think on concept of iRack. Thanks to Technology, which made the concept a reality today.
- iRack Block a Self Cooled, Self Powered & Self Contained Rack. Trend towards having Intelligent Infra Capsules/Modular Data Centres on Premises at Banking & Insurance Sector, Warehouses, Manufacturing sector & Educational Institutions made the Rack manufactures to think on concept of iRack Block. Thanks to Technology which made the concept a reality today.
- The AcoustiRACK™ ACTIVE (ARA™) is a soundproof, cabinet providing unprecedented levels of noise reduction up to 30 dB(A) with 8 KW of heat dissipation and dust protection for 19-inch servers and networking equipment.
- When combined with unique, high-quality acoustic materials, the ARA™ achieves previously unattainable spatial noise reduction over the entire frequency bandwidth of the audible spectrum.
- The colocation model demands controlled power supply, monitored cooling, and security features to ensure sustainability, reliability, cost-efficiency, and an eco-friendly approach.
- The Colocation Racks and Colocation Cabinets often referred to as server racks, are effective in cord management and increasing the cooling efficiency of the data center environment.
- HDVCO Specially designed to meet the challenges of high density cable management due to increase of cable volume and more due to introduction of angular jack panel.
- HDHCO Specially designed to meet the challenges of high density cable management due to increase no. of patch panel per Rack and also introduction of angular jack panel.
- Cable Runway is vital part of cable management of horizontal & backbone cable in IT infrastructure. NetRack offers Runway & accessories, which are completely modular, made of Special profile steel tube with high strength and low weight to minimize deflections with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001 Manufacturing & Quality management system to ensure highest quality product.
- Patch Rack / Runway specially designed for mounting patch panels on the runway in sever rooms, data centre and labs. Racks manufactured out of steel sheet punched, formed, welded and Powder coated with highest quality standards under stringent ISO 9001-2008 Manufacturing & Quality management system to ensure highest quality product.
- DC Power Distribution (DCDB) is very important accessory for Telecom racks as majority of equipments work on DC voltage, NetRack after carefully studying the Requirements offer 120A to 2000 Amp systems with 20X3mm to 100X10mm high quality Coper BUSBARS with tapped hole for power cable Termination to mange different requirements in industry.
- The Standard models of 19, 21 or 23 inch standard, Available with MCB mounting OR with out MCB Mounting can be 3U, 4U and 6U variants based Current and Internal configurations. DCDB can be customised based on special large Requirements.
- WM Series, General Electronics Racks for Small Networking, AV, Telecom & Lab application. Racks are manufactured out of steel sheet punched, formed, welded and powder coated with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001 Manufacturing & Quality management system to ensure highest quality product.
- WM-DS Series, General Electronics Racks for Small Networking, AV, Telecom & Lab application. Racks manufactured out of steel sheet punched, formed, welded and powder coated with highest quality standards under stringent ISO 9001-2008 Manufacturing & Quality management system to ensure highest quality product.
- Power Distribution is critical part of Rack solution and Industry can't afford down time or failure of product, as this directly impact operation of missions critical equipments further effecting business process.
- PDU with inbuilt reliable Circuit board with digital display and can be programmed to show current, Voltage or Power or roll over on PDU level. This PDU is designed to bridge gap between conventional and intelligent PDU where in user map the load on the PDU and avoid over loading and MCB Tripping.
- NAOR - 2 Post Series are Ultra rigid Racks for high density application for networking / labs / data Centres. These Racks are made of rugged aluminum profiles, individually powder coated and bolted with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001 Manufacturing & Quality management system.
- NAOR - 4 Post Series are Ultra rigid Racks for high density application for networking / labs / data Centres. These Racks are made of rugged aluminum profiles, individually powder coated and bolted with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001 Manufacturing & Quality management system.
- NSTR1 Series, Rigid Racks Specially designed for Telecom application. Racks manufactured out of steel sheet punched, formed, welded and Powder coated with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001 Manufacturing & Quality management system to ensure highest quality product.
- NSTR 2 Series, Racks Specially designed for Telecom application. Racks manufactured out of steel sheet punched, formed, welded and Powder coated with highest quality standards under stringent ISO 9001 | ISO 14001 | ISO 27001 | ISO 45001 Manufacturing & Quality management system to ensure highest quality product.
